



92 Photos
Located
Mission, TX
Mission, TX
Usage
20,124 hrs
20,124 hrs
Serial number
CAT0140HKAPM03012
CAT0140HKAPM03012
Loading...
An inspection report will be available soon. Please check back later.
ID number
#15267539
In yard
No
Features
Enclosed Cab, Air Conditioner, 14 ft / 4.27 m Moldboard, Push Block, Snow Wing, Combination Ripper/Scarifier, 17.5R25 Tires
Notes
COMES WITH IRONCLAD ASSURANCE. SUBJECT TO TEXAS SALES TAX.




















Spin
Featured Photo
Serial Number / VIN
CAT0140HKAPM03012
CE Mark
No CE mark found
Hour Meter / Odometer
20124 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Some not operational, 4 lights are not operational
Travel Alarm
Inoperable
Horn
Inoperable
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual













Seats/Armrests
Mirrors
Steering Controls
Loose steering
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The fault indicator remains on after engine is started.
Warning Lights
Operational, Check engine light stays on, Oil pressure, voltage, drivetrain light stays on
Gauges
Operational
Air Conditioner
Inoperable
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.









A/C Compressor
Compressor will not engage
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
Fuel Leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
After jump starting, the engine ran.











Transmission
Dripping leak
Rear Drive Axle
Dripping Leak
Rear Tandems (Chain Drives)
Dripping Leak
Limited Function Check
The drivetrain was operational.













Pumps (Hydraulics)
Dripping leak
Valves
Dripping leak
Hydraulic Tank
Hoses (Hydraulics)
Articulation Cylinders
Hydraulic Motors
Blade Lift Cylinders
Blade Angle Cylinders
Blade Side Shift Cylinders
Saddle Positioning Cylinder
Saddle Lock Pin
Steering Cylinders
Wheel Lean Cylinders
Limited Function Check
The hydraulic system was operational.























Y-frame
Y-frame Pivot Trunnion
Heavy movement
Blade Tilt Frame (saddle)
Circle Frame and Brackets
Circle Wear Strips
Heavy wear
Circle Support Brackets
Circle Gear Box
Circle Gear
Mold Board Slide Wear Strips
Articulating Center Pins
Front Axle Oscillating Pin
Steering Linkage
Wheel Tilt Linkage
Belly Pans
Limited Function Check (grader)
The main chassis components were operational in a limited check., The main components were operational with movement as indicated.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands
Left Front: Unicure, Left Middle: Unicure, Left Rear: Galaxy, Right Rear: Galaxy, Right Middle: Unicure, Right Front: Unicure
Left Steer Tire
Left Front Drive Tires
Left Rear Drive Tires
Right Rear Drive Tires
Right Front Drive Tires
Right Steer Tire
Wheel Condition
Wheel Studs, Nuts, Lugs



Blade Condition
Blade Cutting Edge Condition
Heavy wear
Ripper
Items must be paid in full by Saturday, June 27, 2026. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.