Moerdijk, NLD

to fit 5.2 - 11.5 ton excavators • weight 430kg • oil flow 65-100 l/min working pressure 130 bar • diameter tool 95mm and CE declaration

to suit 1-3 ton Excavator • Shell width 350mm • Weight 82kg

To suit 1 •5-2 ton Excavator • Copy of declaration of conformity available • Weight 170 kg

to suit 1-3 ton Excavator • Shell width 350mm • Weight 82kg

80mm Pin System • Weight 587kg • to suit 15-25 ton Excavator

To suit 4-5 ton Excavator • Copy of declaration of confirmity available • Weight 275 kg

auger bit to suit 1 •5-5 ton excavator • Back Support HEB1200

to suit 1 •5-3 ton excavator • Oil flow (l/min) 25-35 • operating pressure (bar) 150-200.

to fit 3.2 - 6.5 ton excavators • weight 250kg • oil flow 35-60 l/min working pressure 130 bar • diameter tool 65mm and CE declaration

to fit 3.2 - 6.5 ton excavators • weight 250kg • oil flow 35-60 l/min working pressure 130 bar • diameter tool 65mm and CE declaration

To suit 3-4 ton Excavator • Copy of declaration of conformity available • Weight 200 kg

To suit 0 •5-1 ton Excavator • Copy of declaration of conformity available • Weight 140kg

Auger Bit to suit 3-6 ton Excavator • Copy of declaration of conformity available • 71kg

To suit 1 •5-2 ton Excavator • Copy of declaration of conformity available • Weight 170 kg

to suit 1-3 ton mini Excavator • Shell width 350mm • Weight 86kg

to suit 3-5 ton Excavator • Weight 182kg

to suit 1-3 ton mini Excavator • Shell width 350mm • Weight 86kg

6 Cylinder Diesel Engine • Air-cooled • with starter motor • alternator • and compressor.

To suit 0 •5 ton Excavator • Copy of declaration of conformity available • Weight 120 kg

To Suit 0 •5-1 ton Excavator • Copy of declaration of conformity available • Weight 135 kg

To suit 0 •5 ton Excavator • Copy of declaration of conformity available • Weight 105 kg

To suit 3-4 ton Excavator • Copy of declaration of conformity available • Weight 205 kg

(cone splitter) to suit 3-7 ton excavator • with 200mm Cone

to suit 1-6 ton excavator.

(350mm) • to suit 7-12 ton excavator • with MS08 Symlock

(cone splitter) to suit 1 •5-4 ton excavator • with 200mm Cone • Copy of declaration of conformity available • 70kg

to suit 2-5 ton mini excavator

Fits Cat 320