144 Photos
Schwarze M6000 on 2002 Sterling SC8000 Sweeper Truck
Located
Calgary, AB, CAN
Calgary, AB, CAN
Usage
35,919 mi
35,919 mi
Serial number
49HAADBV57DX54594
49HAADBV57DX54594
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15427910
In yard
No
Features
Cummins 6 Cylinder Diesel Engine, Air Conditioner, Cruise Control, Automatic Transmission, 12000 lb Front Axle, 21000 lb Rears, 33000 lb GVWR, 11R22.5, Rubber Suspension, 122 in Wheelbase, Deutz 67 hp Auxiliary Engine, Mechanical Broom Sweeper, Dual Controls, Front Spray Bar, 60 in Rear Broom, Gutter Brooms, Material Elevator, Water System, Hydraulic Dump
Notes
**No Title available-Sold with Bill of Sale only. Please check with your local jurisdiction for additional documentation needed to register** <br><br> ***UNABLE TO PROVIDE DOCUMENTS TO REGISTER/TITLE IN THE USA***
Supporting documents
General Appearance
Serial Number / VIN
49HAADBV57DX54594
Hour Meter / Odometer
35919 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Motor Vehicle Safety Standards Label
Yes
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Engine
Emissions Information
US EPA Label not legible
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
Visible
Starter
Operational
Air Compressor
Operational
Fuel System
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Cab
Engine Hours
No Hour Meter for Front Engine
Control Station
Mirrors
Window Controls
Both Manual
Seats/armrests
Seat Belts
Operational
Horn
Electric horn operational
Oil Pressure
The gauge registers in the operating range. 20 PSI
Warning Lights
Operational
Gauges
Left side operational, Inoperable gauges: Fuel Gauge Reads Empty. Right Side Water Temp Inop., Some gauges could not be properly checked during a short operating period.
Max. Air Pressure Reading
120 psi
Air Conditioner
Inoperable, Does not blow cold air.
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Drivetrain
Transmission
Operational
Drive Shaft
Rear Drive Axle
Limited Function Check
The drivetrain was operational.
Hydraulics
Pumps (Hydraulics)
Dripping leak
Hydraulic Motors
Valves
Hydraulic Tank
Low fluid level
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Chassis
Steering Linkage
Brake Type
Air brakes
Park Brake
Stopped the machine while rolling
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
Suspension Bushings
Frame Condition
Left Steer Tire
Left Rear Drive Tires
Right Rear Drive Tires
Right Front Drive Tires
Wheel Condition
Wheel Studs
Debris Tank
Hydraulic Door Locks
Main Broom
Gutter Brooms
Pickup Head Curtains
Water Tank
Pressure Pump - Water
Not operationally checked
Elevator Chains/Belts
Elevator Sprockets
Elevator Flights
Limited Function Check
The main components were operational when checked without a load.
Upper Engine
Emission Certification Label
US EPA certification label
Starter
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Limited Function Check (Engine)
The engine started and ran.
Oil Sample Analysis
Oil Sample Analysis
| engine-1 | engine-2 | |
|---|---|---|
| Aluminum | 12.57 PPM | 4.18 PPM |
| Chromium | 2.82 PPM | 5.03 PPM |
| Copper | 3.5 PPM | 6.57 PPM |
| date of analysis | Jul 16, 2026 | Jul 16, 2026 |
| Iron | 59.52 PPM | 29.16 PPM |
| Lead | 0.84 PPM | 1.97 PPM |
| Nickel | 1.1 PPM | 1.88 PPM |
| Silicon | 3.84 PPM | 21.04 PPM |
| Silver | 1.23 PPM | 0 PPM |
| Tin | 0.62 PPM | 0.68 PPM |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Tuesday, January 8, 2030. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.