120 Photos
2008 Guntert S850 Slip Form Paver
Located
Marietta, GA
Marietta, GA
Usage
2,621 hrs
2,621 hrs
Serial number
S850C714156
S850C714156
2008 Guntert S850 Slip Form Paver
Marietta, GA
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15986190
In yard
No
Features
Crawler Mounted, Guide Sensors, Tier 3, 2010 US EPA Label, 137 in Trimmer Head, 12 Vibrator Circuits, 16.5 in Triple Grouser Track Shoes w/Rubber Pads
General Appearance
(16)
Serial Number / VIN
S850C714156
Hour Meter / Odometer
2621 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Safety
(3)
Safety Lock Out/Stop
Operational
Control Station
(19)
Gauges
Operational
Engine Oil Pressure
No oil pressure indicator
Warning Lights
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
(12)
Engine
2010 US EPA Label
Emission Label
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
(4)
Drive Motors
Limited Function Check
The drivetrain was operational.
Hydraulics
(27)
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Auxiliary Hydraulic Plumbing
Operational
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Chassis
(23)
Leg Condition
Leg Slide Wear Plates
Trimmer
Limited Function Check
The main chassis components functioned when checked without a load.
Steering Linkage
Frame Condition
Limited Function Check
The main chassis components functioned with wear in the pivot points.
Undercarriage
(16)
Track Tensioners
Operational
Track Pads
Broken pads, Missing bolts
Track links
Pins and Bushings Turned?
Track Rollers
Full rock guards. Not visible.
Idlers
Sprockets
No visible issues
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Nov 03, 2026 |
| Silicon | 1.1 PPM |
| Tin | 2.18 PPM |
| Silver | 0 PPM |
| Aluminum | 1.21 PPM |
| Chromium | 0.01 PPM |
| Lead | 0.65 PPM |
| Copper | 3.9 PPM |
| Nickel | 0.11 PPM |
| Iron | 5.91 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Transaction fees
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees (opens in a new tab) will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.